K-array KA24 Manuel d'utilisateur télécharger pdf (Page 12)

KA24/KA84

PRELIMINARY

11.1 POWER SUPPLY

CH 5 - 6

3 4 5

3. AC INPUT. PowerCon for AC power.

4. AC LINK. PowerCon ouput for feeding AC mains

power to additional K-array components with a

powercon AC input socket.

5. POWER ON LED. Indicates the amplifier is ON.

11.2 AUDIO CONNECTIONS

CH 5 - 6

17181921

6. CH 1 MIC/LINE INPUT. XLR analog input, with

selectable sensitivity for Mic (-30 dBu) or Line (+4 dBu).

7. CH 2 MIC/LINE INPUT. XLR analog input, with

selectable sensitivity for Mic (-30 dBu) or Line (+4 dBu).

8. CH 3 MIC/LINE INPUT. XLR analog input, with

selectable sensitivity for Mic (-30 dBu) or Line (+4 dBu).

9. CH 4 MIC/LINE INPUT. XLR analog input, with

selectable sensitivity for Mic (-30 dBu) or Line (+4 dBu).

10. CH 1 MIC/LINE SWITCH. Selects CH 1 input

sensitivity for Mic (pressed) or Line (depressed) level.

11. CH 2 MIC/LINE SWITCH. Selects CH 2 input sensitivity for Mic (pressed) or Line (depressed) level.

12. CH 3 MIC/LINE SWITCH. Selects CH 3 input sensitivity for Mic (pressed) or Line (depressed) level.

13. CH 4 MIC/LINE SWITCH. Selects CH 4 input sensitivity for Mic (pressed) or Line (depressed) level.

14. PHANTOM POWER SWITCH. Turns phantom power (48 V) on (pressed) / off (depressed) on CH 1,

CH 2, CH 3, CH 4 inputs (only for channels with MIC/LINE SWITCH pressed).

15. CH 1 PARALLEL OUT. XLR parallel output, providing a direct signal from the CH 1 Input. This output

cannot be processed or controlled via the K-Framework software.

16. CH 2 PARALLEL OUT. XLR parallel output, providing a direct signal from the CH 2 Input. This output

cannot be processed or controlled via the K-Framework software.

17. CH 3 PARALLEL OUT. XLR parallel output, providing a direct signal from the CH 3 Input. This output

cannot be processed or controlled via the K-Framework software.

18. CH 4 PARALLEL OUT OR DSP OUT. This XLR connector provides a direct signal from the CH 4 Input

when the switch 19 is depressed. In that case, this output cannot be processed or controlled via the

K-Framework software. Otherwise, when the switch 19 is pressed, this XLR acts as an auxiliary XLR

balanced output, controlled via the K-Framework software. Users can select the signal routed to this

output and manage its amplitude and EQ individually.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Pas de commentaire

K-array KA24 Manuel d'utilisateur Page 12